TQ402 vs TQ403 | Vibro-Meter Sensor Comparison What are TQ402 and TQ403 Proximity Sensors? TQ402 111-402-000-013 and TQ403 111-403-000-013 both famous as non-contact transducer. They are designed situable for shaft vibration and axial position in rotating equipment, widely used in steam, gas and hydraulic turbines, as well as in alternators, turbo-compressors and pumps. TQ402 and TQ403 have an int...
IPC707 244-707-000-012 is designed as a signal conditioner, it has replaced the IPC704 244-704-000-042 since the year of 2019. IPC707 can totally match and even better of the IPC704. There are below improvements for IPC707: ▪ A new filter compliant with ISO 2954, independent of transmission gain and input impedance ▪ A new grounding concept to improve immunity to rack voltage disturbances ▪ ...
World famours intergrated machinery protection, condition and performance monitoring brand Vibro upgrade the rack- based system from VM600 to VM600 Mk2. The basic configuration of the machinery protection system including the following hardware: 1. The 19''x6U rack 2. Rack power supply 3. Machinery protection card 4. Input/Out card for the MPC4 5. Analog monitoring card 6. Input/Out card for the A...
The proximity measurement chains signal conditioner is newly upgrade from IQS450(with the part number (204-450-000-002) to IQS900 (with the part number 204-900-000-011). Additionally, IQS900 signal conditioner is backward compatible replacement for IQS450. Besides cosmetic modifications in appearance, this upgrade brings significant technical improvements to the module itself. One notable feature ...
The famous contactless measurement proximity sensor TQ402 111-042-000-013 has been replaced by the newly upgraded TQ902 111-902-000-011 sensor. TQ902 is functionally identical and backward-compatible with the existing TQ4x2 proximity measurement chain, delivering overall improved performance versus the legacy TQ402. TQ902 brings improved mechanical performance. It supports 6-bar differential press...
TQ902 111-902-000-011 and TQ402 111-402-000-013 part numbers are always followed by a lengthy order number string. These ordering numbers are quite important, as each code represents the configuration of the sensor. From these codes, the operating environment, body length, unthreaded length, cable protection and total system length can be read directly. However, with the upgrade from TQ402 to TQ90...
Mon/Sat 9.00am to 7.00pm
